Cicoria Agricultural Machinery

SQUARE BALERS

Modern design - Robustness - Ease of use
Low running costs - good performances
General transmission is by means of helical gear reduction and a single oversized chain
A friction overrunning clutch and four safety bolts are an ideal protection against overloading for the gear reduction, plunger, forks, knotters and needles.
Automatic belt and chain idlers means longer life for the transmissions, and less maintenance work.
A counterweighted crank and large-diameter flywheel give greater stability working when the machine is running, even at more then 90 strokes per minute.
The plunger, with its two sides cold forged into a single piece is extremely robust, and runs on a series of 10 pre-lubricated bearings.
The floating pick-up is balanced by two springs, and operated by a V-belt
The knotters ( both twine and wire ) use parts Rasspe to make changing and finding them easier, but they also have built-in characteristics which make mistakes almost impossible. The needles are made of pressed sheet steel, are very light, and are extremely easy to set.
The quality of bales, whether straw or forage, and whatever length and compactness, is fail-proof thanks to the wide range of setting for the forks.
The flywheel and other moving parts are completely protected by shields.
All machines are supplied with upper and lower pressers, both mobile and with independent or overall controls.
Maximum harvesting width respect to the dimension.

TECHNICAL SPECIFICATIONS

M O D E L S		2545	2547	2747	2749	TP 2749S3

COMPRESSION CHAMBER	cm.	35x47	35x47	37x47	37x49	37x49
KNOTTERS		2 wire twine	2 wire twine	2 wire twine-iron	2 wire twine-iron	2 wire twine-iron
PICK-UP UNIT
Pick-up width	cm.	140	160	160	160	160
Tine bars	n.	4	4	4	4	4
Tines	n.	56	64	64	64	64
OUT PUT
Adjustable bales length	cm.	40–130	40-130	40–130	40–130	40–130
Bale weight	Kg.	18–30	18–30	20–40	25–50	27–42
PLUNGER on bearings
Strokes per minute	n.	88	88	88	88	88
Traverse	cm.	71	71	71	75	75
FEEDING by 2 forks
Feed opening	cmq	1640	1640	1715	1850	1850
DIMENSIONS
Length	cm.	450	450	450	480	480
Width	cm.	210	240	240	240	250
Height	cm.	155	155	160	160	190
Weight	Kg.	1150	1200	1400	1450	1980
REQUIRED POWER	HP	20	25	30	35	45

Models 2747 and 2749 can be equipped with special straw cutting-pounding unit, with large-diameter cylinder, a baler to pick-up cut, pound, crush and bale long straw.